Printed PU Leather Laptop Sleeve, Edge to Edge on Both Faces

A zip-around laptop sleeve in PU leather, printed right to the edge in full colour on both outer faces, with a matching printed charm on the zip pull and a padded black lining. It is a sleeve, not a bag: no handle and no shoulder strap, made to slide into a backpack or be carried on its own.

• Material: PU leather over foam padding
• Size & fit: cut to the device you specify · zip-around closure on three sides
• Printing: full colour across both outer faces, right to the edge
• Lining: padded black polyester interior
• Fittings: full-length metal zip with a matching printed charm on the pull
• Minimum order: 500 pcs
• Lead time: 3 to 4 weeks from artwork approval

PU is a coated material, and Malaysian storage conditions are harder on it than the print. This is worth saying plainly because few suppliers will. Polyurethane coatings break down with prolonged heat and humidity, and an unsold carton sitting for a long stretch in an unventilated store room or on a bare concrete floor will age faster than the same stock in an air-conditioned office. The print itself is stable; it is the surface underneath that goes first, usually as tackiness or flaking at the folded corners. Two practical consequences: order against a campaign you can actually distribute rather than stockpiling years of inventory, and keep cartons off the floor and out of the hottest part of the store room. If you need something that shrugs off long storage in a warehouse, felt or tyvek is the more honest answer than PU.

How it looks tells you nothing about how much it protects. The outer face is decoration; the protection comes from the foam layer between the shell and the lining, and that layer is specified separately from the print. A sleeve like this guards against scuffs, keys and the ordinary knocks of a bag, and it will not save a machine from a drop onto a tiled floor. If the brief is a gift that looks like the brand, this is right. If the brief is genuine transit protection for field staff carrying machines daily, say so when you enquire and we will quote a thicker padding spec rather than let the artwork decide the build.

The samples shown were produced to artwork supplied by the client. We print what you own or are licensed to use, and we will ask for written confirmation of rights before production.

It suits brand teams running a tech-gift campaign where the sleeve is the canvas rather than a logo carrier. For a softer shell that fits a range of device sizes, see our 17-inch neoprene sleeve; for the budget end of the range, the custom felt laptop sleeve is the alternative.

Send us your logo and quantity, and we’ll reply with a quote and a digital mockup for your approval.